Mounting & Laminating


On all of the above materials we can apply full color digitally printed vinyl, it can ship with either no lam or with a UV over lam. We have 2 mounting packages, Standard Mounting and Premium Mounting

Standard mounting

Full color matt digital print mounted to either 3/16” Foam Core, 3/16” Coroplast or .o4o Polystyrene. Prints can be any size from 1’x1’ to as large as 4’x8’ must ship flat. Lamination is not included

3/16″ Foam Core
Consists of foam laminated on both sides with white clay coated paper. This lightweight material can be used for a wide variety of graphic arts applications including point-of-purchase displays, exhibits, and signs. Because it is a paper product this material is best used for inside use.

3/16″ CoroPlast
(cardboard made out of plastic) it is sturdy plastic sheeting extruded from either polypropylene or high density polyethylene. It is more durable than corrugated fiberboard, lighter in weight than wood and solid plastic sheets. Its fluted ribs support both surfaces, it light weight, tough and abuse resistant. Additionally, it is both chemical and water resistant making it an idea choice for numerous outdoor commercial and industrial applications.

Polystyrene
.040 is a lightweight flexible plastic material. This material is both chemical and water resistant making it an idea choice for numerous outdoor commercial and industrial applications.

Premium Mounting

Full color gloss digital print mounted to either 3/16” Gator Board or 1/8 Sintra. Prints can be any size from 1’x1’ to as large as 4’x8’ must ship flat. Lamination is included

Black Gatorfoam
3/16″, 1/2″, 3/4″, is a lightweight structural panel consisting of a rigid polystyrene foam core faced on both sides by a smooth, moisture resistant sheet of solid polystyrene. The foam and facers are permanently bonded together. These boards are rigid and lightweight making them an excellent choice for signage, photo mounting, exhibits, and point of purchase displays. Because it is a paper product this material is best used for inside use.

White or Black Sintra
1/8″ is an expanded PVC foam board with a matte finish. It is lightweight, durable, chemical resistant, has fire retardant capabilities, and is available in a variety of colors in 3mm. It is an excellent substrate for point-of-purchase displays and signs. Sintra is also chemical and water resistant making it an idea choice for numerous outdoor commercial and industrial applications.

 

Additional Mounting Surfaces

MDO
1/2 plywood type material that has a coating on it allowing decals to go on. It is perfect for permanent outdoor signage.

Laminating

UV Cold Over Laminates
3 mil Gloss lams are what we use when mounting prints to boards for extra protection against scratching and UV light.

Thermal (Hot) Lamination
Gloss in 3 mil, 5 mil and 10 mil.
Thermal lams (hot lams) encapsulate your art in the lam, top and bottom to help protect it and makes the print thicker and more rigid.